U-glass wani sabon nau'in gilashin bayanin martaba ne, kuma an yi amfani da shi tsawon shekaru 40 a ƙasashen waje.Ana haɓaka samarwa da aikace-aikacen gilashin U-gila a kasar Sin sannu a hankali cikin 'yan shekarun nan.Gilashin U-glass yana samuwa ta hanyar latsawa da ƙaddamarwa kafin ƙirƙirar, kuma sashin giciye yana cikin siffar "U", don haka ana kiran shi U-glass.

Rabe-raben gilashin U-type:

1. Bisa ga rabe-raben launi: marar launi da launi daidai da haka.An fesa gilashin mai launin U-dimbin yawa kuma an shafe shi.
2. Bisa ga rarrabuwa na gilashin surface: santsi tare da kuma ba tare da juna.
3. Dangane da rarrabuwar ƙarfin gilashin: nau'in talakawa, tauri, fim, Layer Layer, fim mai ƙarfi, da sauransu.

Bukatun shigarwa na ginin gilashin U-dimbin yawa

1. Kafaffen bayanan martaba: Bayanan martaba na aluminum ko wasu bayanan ƙarfe za a gyara su a kan ginin tare da ƙwanƙwasa bakin karfe ko rivets, kuma kayan firam ɗin za su kasance da ƙarfi tare da bango ko buɗewar ginin, ba tare da ƙasa da maki 2 ba a kowace mita madaidaiciya.

2. Gilashi a cikin firam: tsaftace saman ciki na gilashin U-dimbin yawa, saka shi a cikin firam, yanke ɓangaren filastik mai buffer zuwa tsayi daidai kuma saka shi cikin ƙayyadaddun firam.

3. Lokacin da aka shigar da gilashin U-dimbin yawa zuwa sassa uku na ƙarshe, da farko sanya guda biyu na gilashi a cikin firam, sa'an nan kuma hatimi tare da gilashin gilashi na uku;Idan ragowar nisa na rami ba za a iya sanya shi a cikin gilashin duka ba, za a iya yanke gilashin U-dimbin yawa tare da tsayin daka don saduwa da ragowar nisa, kuma gilashin da aka yanke ya kamata a fara shigar da shi.

4. Ya kamata a daidaita rata tsakanin gilashin U-dimbin yawa bisa ga yawan zafin jiki lokacin da yawan zafin jiki ya karu;

5. Lokacin da nisa a kwance na gilashin U-dimbin yawa fiye da 2m, madaidaicin madaidaicin mamba na iya zama 3mm;Lokacin da tsayi bai wuce 5m ba, ana ba da izinin karkatar da firam ɗin ya zama 5mm;Lokacin da tsayi bai wuce 6m ba, ana ba da izinin karkatar da memba ya zama 8mm;

6. Rata tsakanin firam da gilashin U-dimbin yawa za a cika shi da kushin na roba, kuma yanayin lamba tsakanin kushin da gilashin da firam ɗin ba zai zama ƙasa da 12mm ba;